Vehicle Direction Alert Alarm Warning Module Programming and Setup
WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
After replacing the vehicle direction alert alarm warning (VDAAW) module, perform the following procedures in the specified order:
- SPS Programming - Refer to Service Programming System (SPS)
- VDAAW Module Calibration - Refer to Vehicle Direction Alert Alarm Warning Module Calibration
IMPORTANT:
When using SPS to program the VDAAW, connect the vehicle to the TIS terminal using a Tech 2 and Candi module. Using the MDI to SPS program the VDAAW will result in a failure to complete the programming operation.