LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Data Communication System) >> Repair Instructions >> Body Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the right console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Right Side .
  3. Remove the body control module (BCM) screws.
  4. Remove the BCM wire harness connectors.
    5. Fig 1: View Of BCM
    GM1207700Courtesy of GENERAL MOTORS CORP.
  5. Remove the BCM.
scientia non olet · About LEMON Manuals