LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Keyless Entry System & Remote Functions) >> Repair Instructions >> Remote Control Door Lock Receiver Replacement (Sedan) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Receiver Electrical Connector
    GM1250536Courtesy of GENERAL MOTORS CORP.
  1. Install the receiver to the vehicle.
  2. Connect the electrical connectors to the receiver.
  3. The transmitter will need to be programmed after replacement. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals