Inflatable Restraint Sensing and Diagnostic Module Programming and Setup

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: The Air Bag indicator light may remain ON after the instrument panel module (IPM) or sensing and diagnostic module (SDM) is replaced and during the programming procedure for the IPM until after the procedure is completed and the ignition key is cycled OFF and ON.

If the SDM is replaced, perform the Learning the Restraints ID procedure, for the IPM. Refer to Instrument Panel Module Programming and Setup for Learning the Restraints ID procedure.