Vehicle Direction Alert Alarm Warning Module Replacement
WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS CORP.
| Callout |
Component Name |
| 1 |
Vehicle Direction Alert Alarm Warning Module Procedure
- Disconnect the electrical connector.
- Use a small flat bladed tool and insert along the top edge in the recessed notches and push in both tabs to release the upper edge of the module.
- Then slide upward to disengage the lower tabs of the module from the bracket.
- Refer to Control Module References
for set-up and programming information.
|