Data Link References
WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
This table identifies which serial data link that a particular module uses for in-vehicle data transmission. Some modules may use more than one data link to communicate. Some modules may have multiple communication circuits passing through them without actively communicating on that data link. This table is used to assist in correcting a communication malfunction. For the description and operation of these serial data communication circuits refer to Data Link Communications Description and Operation .
Data Link References
| Control Module | Data Link Type | Diagnostic Procedure |
|---|---|---|
| Schematic Reference: Data Communication Schematics | ||
| Body Control Module (BCM) | Class 2 | Scan Tool Does Not Communicate with Class 2 Device |
| Communication Interface Module (OnStar®), w/UE1 | Class 2 | Scan Tool Does Not Communicate with Class 2 Device |
| Digital Radio Receiver (DRR), w/U2K | Class 2 | Scan Tool Does Not Communicate with Class 2 Device |
| Electronic Brake Control Module (EBCM) | Class 2 | Scan Tool Does Not Communicate with Class 2 Device |
| Engine Control Module (ECM) |
|
|
| Generator Battery Control Module | Class 2 | Scan Tool Does Not Communicate with Class 2 Device |
| Inflatable Restraint Sensing and Diagnostic Module (SDM) | Class 2 | Scan Tool Does Not Communicate with Class 2 Device |
| Instrument Panel Cluster (IPC) | Class 2 | Scan Tool Does Not Communicate with Class 2 Device |
| Radio | Class 2 | Scan Tool Does Not Communicate with Class 2 Device |
| Theft Deterrent Control Module (VTD), w/BAE | Class 2 | Scan Tool Does Not Communicate with Class 2 Device |
| Transfer Case Shift Control Module (TCSCM), w/4WD | Class 2 | Scan Tool Does Not Communicate with Class 2 Device |