Circuit/System Verification
- Inspect the frontview camera for any debris on the lens or a damaged bezel or bezel seal.
- Clean any debris from the lens. If the lens, bezel, or bezel seal are damaged, replace as necessary.
- Ignition ON, frontview camera switch is OFF, verify that the LCD is not deployed from the ISRVM.
- If the LCD is deployed and an image is present, refer toCircuit/System Testing
- If the LCD is deployed but there is no image, refer to Circuit/System Testing .
- Ignition ON, frontview camera switch is ON, verify that the LCD is deployed and an image is present on the display.
- If the LCD is deployed but there is no image present, refer to Circuit/System Testing
- If the LCD will not deploy, refer to Circuit/System Testing .