LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2009 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 6.2L - Introduction >> Repair Instructions >> Plastic Collar Quick Connect Fitting Service >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Lubricating Male Pipe End
    GM155425Courtesy of GENERAL MOTORS CORP.
    WARNING: Refer to Fuel Pipe Fitting Warning .
  1. Apply a few drops of clean engine oil to the male fuel pipe end.
    2. Fig 2: Pushing Quick-Connect Fittings Together
    GM21855Courtesy of GENERAL MOTORS CORP.
  2. Push both sides of the quick-connect fitting together in order to cause the retaining tabs to snap into place.
    3. Fig 3: Ensuring Quick-Connect Fitting Is Secure
    GM155399Courtesy of GENERAL MOTORS CORP.
  3. Once installed, pull on both sides of the quick-connect fitting in order to make sure the connection is secure.
scientia non olet · About LEMON Manuals