Communication Interface Module Scan Tool Information

Vehicle Communication Interface Module Scan Tool Data Parameters

Parameter	System State	Expected Value	Description
Operating Conditions: Ignition ON
Date	-	Numeric	This displays DD/MM/YYYY. This is the date the VCIM was manufactured.
GPS Signal	-	Yes	The scan tool displays Yes or No. Yes is displayed if there is a GPS signal received by the VCIM.
Signal Strength	-	68	The scan tool displays 0-100. This is the VCIM signal strength.
Signal Type	-	Digital	The scan tool displays Digital or Analog. This is the signal type received by the VCIM.
Time	-	Numeric	The scan tool displays HH:MM:SS. This is the current time.
Transceiver ID	-	Varies	The scan tool displays a 2-5 digit value. This is the transceiver identification number.

Vehicle Communication Interface Module Scan Tool Output Controls

Output Control	Description
B1000 Data	This shows the data recorded when DTC B1000 was set in the VCIM.
Green LED	The VCIM illuminates the green LED on the inside rearview mirror when ON is selected.
Phone Call Test	When ON is selected, VCIM commands OnStar to connect to the OnStar Center.
PRL Update	The VCIM performs a preferred roaming list (PRL) update when this is selected.
Program Digital Home SID - NID	Select SID (Station ID) and NID (Network Interface Device) per your location.
Program Phone Number	VCIM provides mobile ID number and mobile directory number for this vehicle. Use arrow keys to change the phone number if necessary.
Red LED	The VCIM illuminates the red LED on the inside rearview mirror when ON is selected.
Set Language	Pick an option between 3 different languages: English, French Canadian, and Spanish.
VCIM Setup	Screen displays: Move the vehicle to an open, outside area and make sure the vehicle is running. Following this VCIM setup procedure, a call will automatically be made to the OnStar Call Center. Inform the Call Center advisor that a new VCIM has been installed. Have the STID and ESN from the new VCIM ready to provide to the advisor. Refer to Communication Interface Module Programming and Setup .