LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2009 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the power steering pulley. Refer to Power Steering Pump Pulley Replacement .
  2. Place a drain pan under the pump.
  3. Remove the hose guide bracket from the front of the pump.
  4. Remove the hoses from the pump.
  5. Remove the bolt retaining the rear bracket to the engine.
    6. Fig 1: View Of Power Steering Pump
    GM346660Courtesy of GENERAL MOTORS CORP.
  6. Remove the bolts from the front of the pump.
  7. Remove the pump from the vehicle.
    8. Fig 2: Identifying Bracket From Rear Of Pump
    GM656325Courtesy of GENERAL MOTORS CORP.
  8. Remove the bracket (3) from the rear of the pump (1).
scientia non olet · About LEMON Manuals