Communication Interface Module Replacement

Fig 1: Identifying Communication Interface Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the instrument panel (I/P) center trim panel. Refer to Instrument Panel Center Trim Panel Replacement (Right Hand Drive) or Instrument Panel Center Trim Panel Replacement (Left Hand Drive) .
1	Communication Interface Module Guide Pin Tip: Turn counterclockwise to remove from the module in order to release the module from the bracket.
2	Communication Interface Module Procedure Disconnect the electrical connectors. Tip the module towards the opening in the I/P to remove. Reprogram the communications interface module if replacing the unit. Refer to Control Module References . When replacing the communication interface module be sure to transfer the bluetooth antenna, if equipped.

Callout

Component Name

Communication Interface Module Guide Pin
Tip: Turn counterclockwise to remove from the module in order to release the module from the bracket.

Communication Interface Module

Procedure

Disconnect the electrical connectors.
Tip the module towards the opening in the I/P to remove.
Reprogram the communications interface module if replacing the unit. Refer to Control Module References .
When replacing the communication interface module be sure to transfer the bluetooth antenna, if equipped.