Disc Brake Component Specifications

Application	Specification
Application	Metric	English
Front Brakes
Rotor Discard Thickness *	26.5 mm	1.04 in
Rotor Minimum Allowable Thickness After Refinish	27.0 mm	1.06 in
Rotor Thickness (new)	28.0 mm	1.10 in
Rotor Maximum Allowable Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rear Brakes
Rotor Discard Thickness *	10.5 mm	0.413 in
Rotor Minimum Allowable Thickness After Refinish	11.0 mm	0.433 in
Rotor Thickness (new)	12.0 mm	0.472 in
Rotor Maximum Allowable Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications.