LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2009 >> H3 Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.7L - Introduction >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of Fuel Tank Module
    GM1564238Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank module. Refer to Fuel Tank Module Replacement .
  2. Disconnect the fuel level sensor electrical connector (1) from the module cover.
  3. Fig 2: Identifying Fuel Level Sensor
    GM1564239Courtesy of GENERAL MOTORS CORP.
  4. Complete the following in order to remove the fuel level sensor (1) from the module bucket:
    1. Disengage the locking tabs on the sensor.
    2. Slide the sensor upward from the bucket.