LEMON Manuals
: Even more car manuals for everyone: 1960-2025
Home
>>
Hummer
>>
2009
>>
H3T Alpha
>>
Repair and Diagnosis
>>
Engine Performance
>>
System
>>
Engine Controls And Fuel - 5.3L - Introduction
>>
Repair Instructions
>>
Knock Sensor 1 Replacement
>>
Removal Procedure
April 5, 2026:
LEMON Manuals is launched!
Read the announcement.
Removal Procedure
Fig 1: Engine Wiring Harness Electrical Connector & Crankshaft Position (CKP) Sensor Wire Harness
Courtesy of GENERAL MOTORS CORP.
Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Disconnect the engine wiring harness electrical connector (2) from the knock sensor (1).
Fig 2: Left Side Knock Sensor & Bolt
Courtesy of GENERAL MOTORS CORP.
Remove the knock sensor bolt (739) and sensor (718).