LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2010 >> H3 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.7L - Repair Instructions >> Repair Instructions >> Ignition Coil Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the air cleaner resonator and outlet duct. Refer to Air Cleaner Resonator and Outlet Duct Replacement .
    2. Fig 1: ECT Sensor, Fuel Injector, Ignition Coil & HO2S Engine Wiring Harness Electrical Connectors
    GM1350694Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the ignition coil connectors (3) from the ignition coils (4).
    3. Fig 2: Ignition Coil
    GM858168Courtesy of GENERAL MOTORS CORP.
  3. Remove the ignition coil bolts.
  4. Remove the ignition coils from the camshaft cover.
scientia non olet · About LEMON Manuals