System Specifications
Front BrakesRotor Discard Thickness * 26.5 mm (1.04 in)
Rotor Minimum Allowable Thickness After Refinish 27.0 mm (1.06 in)
Rotor Thickness (new) 28.0 mm (1.10 in)
Rotor Maximum Allowable Lateral Runout 0.06 mm (0.002 in)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 in)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 in)
Rear Brakes
Rotor Discard Thickness * 10.5 mm (0.413 in)
Rotor Minimum Allowable Thickness After Refinish 11.0 mm (0.433 in)
Rotor Thickness (new) 12.0 mm (0.472 in)
Rotor Maximum Allowable Lateral Runout 0.06 mm (0.002 in)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 in)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 in)
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications.