LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2010 >> H3T Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.7L - Repair Instructions >> Repair Instructions >> Air Cleaner Element Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Air Filter Element
    GM1969154Courtesy of GENERAL MOTORS CORP.
  1. Install the air filter element (1), and close the air cleaner housing cover.
    2. Fig 2: Air Cleaner Housing Retainers
    GM1969151Courtesy of GENERAL MOTORS CORP.
  2. Engage the 2 air cleaner housing retainers (1) securing the cover.
    3. Fig 3: Secondary Air Injection (AIR) Pump Inlet Hose
    GM1969060Courtesy of GENERAL MOTORS CORP.
  3. Connect the AIR pump inlet hose (1) quick connect fitting to the air cleaner assembly. Refer to Plastic Collar Quick Connect Fitting Service .
    4. Fig 4: Engine Wiring Harness Electrical Connector & Mass Air Flow/intake Air Temperature Sensor
    GM1969052Courtesy of GENERAL MOTORS CORP.
  4. Connect the engine wiring harness electrical connector (1) to the MAF/IAT sensor (2).
  5. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
scientia non olet · About LEMON Manuals