LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2010 >> H3T Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.7L - Repair Instructions >> Repair Instructions >> Fuel Injector Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

    Fig 1: Fuel Rail Assembly With Injectors
    GM1565311Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel rail assembly. Refer to Fuel Injection Fuel Rail Assembly Replacement .
  2. Disconnect the fuel injector harness electrical connector from the fuel injector.
  3. Remove and discard the fuel injector retainer clip.
  4. Pull the fuel injector from the fuel rail.
    5. Fig 2: Fuel Injector, Clip & O-Ring Seal
    GM351185Courtesy of GENERAL MOTORS CORP.
  5. Remove and discard the fuel injector O-ring seals (2, 4) from both ends of the fuel injector (3).
scientia non olet · About LEMON Manuals