Idle Position Switch
NOTE:
Unless stated otherwise in test procedure, perform all tests using a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm input impedance and/or a Multi-Use Tester (09391-33002
).
IDLE POSITION SWITCH TEST
| Application | Specification | |||||
|---|---|---|---|---|---|---|
| Power Supply (1) | 4 Volts Or More | |||||
| Continuity Check | ||||||
| At Idle (Closed Throttle) (2) | 0 Ohms | |||||
| Off Idle (Open Throttle) | Infinity | |||||
|
||||||