LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 1994 >> Excel Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Emission Systems & Sub-Systems >> Fuel Evaporation >> System Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

System Test

  1. Disconnect Red-striped vacuum hose between throttle body and purge control solenoid valve at throttle body. Connect a hand-held vacuum pump to disconnected vacuum hose. Plug nipple on throttle body where vacuum hose was removed.
  2. With engine at idle and engine coolant temperature at 140°F (60°C) or less on 4-cylinder or 104°F (40°C) or less on V6, apply 7.3 in. Hg vacuum. Vacuum should hold. Raise engine speed to 3000 RPM, and again apply 7.3 in. Hg vacuum. Vacuum should hold.
  3. With engine at idle and coolant temperature at 158°F (70°C) or more on 4-cylinder or 176°F (80°C) or more on V6, apply 7.3 in. Hg vacuum. Vacuum should hold. Turn engine off. Start engine, and apply vacuum, within 3 minutes of starting engine. Vacuum should bleed down.
  4. With engine running for more than 3 minutes after starting, raise engine speed to 3000 RPM and apply 7.3 in. Hg. Vacuum should hold momentarily and then bleed down.
scientia non olet · About LEMON Manuals