LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2000 >> Tiburon Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures >> Fuel System >> ECM Control Relay Test >> Sonata (2.4L)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sonata (2.4L)

  1. Remove ECM control relay which is mounted to right side of instrument panel center support, under radio. Using a fused jumper wire, apply battery voltage to relay terminal No. 8. Using another jumper wire, ground relay terminal No. 6. See Figure.
  2. With relay energized, check for continuity between relay terminals No. 2 and 4. Continuity should exist until voltage is disconnected. If continuity exists, go to next step. Replace relay if continuity does not exist.
  3. Using a fused jumper wire, apply battery voltage to relay terminal No. 7. Using another jumper wire, ground relay terminal No. 5. When relay is energized, check for continuity between relay terminals No. 1 and 7. Continuity should exist until voltage is disconnected. Replace relay if continuity does not exist.
scientia non olet · About LEMON Manuals