Engine Controls - Sensor Operating Range Charts: Introduction: Sensors: Acceleration
NOTE:
XG 300 acceleration sensor specifications are not available from manufacturer.
Start engine and allow to idle. Backprobe acceleration sensor and measure voltage between acceleration sensor connector terminals No. 2 and 3. See WIRING DIAGRAMS article. Compare voltage with expected values. See ACCELERATION SENSOR VOLTAGE table.
ACCELERATION SENSOR VOLTAGE
| Condition | (1) Volts | |||
|---|---|---|---|---|
| Accent & Tiburon | ||||
| Idling | (Fixed Value) 2.3-2.7 | |||
| Driving | (Varying Value) 0.5-4.5 | |||
|
||||