Starter Specifications
STARTER SPECIFICATIONS
| Application | Specification | |||
|---|---|---|---|---|
| Amperage | 90 | |||
| Armature Maximum Runout | ||||
| Standard | 0.002 In. (0.05 mm) | |||
| Limit | 0.0039 In. (0.1 mm) | |||
| Brush Length | (1) | |||
| Commutator Outside Diameter | ||||
| Standard Diameter | 1.157 In. (29.4 mm) | |||
| Wear Limit | 1.118 In. (28.4 mm) | |||
| Insulator Depth | ||||
| Standard Depth | 0.020 In. (0.5 mm) | |||
| Wear Limit | 0.079 In. (0.2 mm) | |||
| No. Of Pinion Teeth | 8 | |||
| Pinion Gap | 0.02-0.079 In. (0.5-2.0 mm) | |||
| Speed | 2800 RPM | |||
| Terminal Voltage | 12 Volt | |||
| Type | Reduction Drive (With Planetary Gear) | |||
|
||||