April 5, 2026: LEMON Manuals is launched! Read the announcement.

Procedure To Install The Lock Cam: Notes

Fig 1: Identifying Lock Cam Positions

G00722191

Courtesy of HYUNDAI MOTOR CO.

Move A/T lever to "P" position to set the key lock cam and the shift lock cam as shown in the figure.
- Check that the key lock cam is located at "B" by the detent pin.
- Check that the shift lock cam is located at "A".
  
  Fig 2: Identifying Lock Cam Positions "A" & "B"
  Courtesy of HYUNDAI MOTOR CO.
Check that the key cylinder is at "LOCK".