Using MICRO 570 Analyzer
- After the battery test, press ENTER immediately for the starter test.
- After pressing ENTER key, start the engine.
- Cranking voltage and starter test results will be displayed on the screen. Take relevant action according to the test results by referring to the starter test results. See STARTER TEST RESULTS table.
STARTER TEST RESULTS
| Result On Tester Display | Remedy |
|---|---|
| Cranking Voltage Normal | System Shows A Normal Starter Draw. |
| Cranking Voltage Low | Cranking Voltage Is Lower Than Normal Level. Check Starter |
| Charge Battery | State Of Battery Charge Is Too Low To Test. Charge Battery & Retest. |
| Replace Battery | Replace Battery. Check Wiring For Open Circuit, Battery Cable Connection, Starter & Repair Or Replace As Necessary. If Engine Does Crank, Check Fuel System. |