Accelerator Pedal: Installation

When installing the return spring and accelerator arm, apply multi-purpose grease around each moving point of the accelerator arm.

Fig 1: Installing Accelerator Arm Spring
Courtesy of HYUNDAI MOTOR CO.
Apply sealant to the bolt mounting hole and tighten the accelerator arm bracket.
Tightening torque

Accelerator arm bracket bolts:

8~12 Nm (80~120 kg.cm, 6~7 lb.ft)

Fig 2: Identifying Accelerator Cable/Arm Grease Location
Courtesy of HYUNDAI MOTOR CO.
Securely install the resin bushing of the accelerator cable on the end of the accelerator arm.

Fig 3: Installing Accelerator Cable To Accelerator Arm
Courtesy of HYUNDAI MOTOR CO.