Engine Control System
TIGHTENING TORQUE SPECIFICATION - ENGINE CONTROL SYSTEM
| Item | Kgf.m | N.m | lbf.ft |
|---|---|---|---|
| PCM installation bolts | 1.0-1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Heated oxygen sensor (Bank 1 / Sensor 1) installation | 5.0 ~ 6.0 | 49.1 ~ 58.9 | 36.2 ~ 43.4 |
| Heated oxygen sensor (Bank 1 / Sensor 2) installation | 5.0 ~ 6.0 | 49.1 ~ 58.9 | 36.2 ~ 43.4 |
| Heated oxygen sensor (Bank 2 / Sensor 1) installation | 5.0 ~ 6.0 | 49.1 ~ 58.9 | 36.2 ~ 43.4 |
| Heated oxygen sensor (Bank 2 / Sensor 2) installation | 5.0 ~ 6.0 | 49.1 ~ 58.9 | 36.2 ~ 43.4 |
| Engine coolant temperature sensor installation | 2.0 ~ 4.0 | 19.6~39.2 | 14.5 ~ 28.9 |
| Manifold absolute pressure sensor installation bolt | 0.9 ~ 1.2 | 8.8~ 11.8 | 6.5 ~ 8.7 |
| Camshaft position sensor [Bank 1] installation bolt | 0.7 ~ 1.0 | 6.9 ~ 9.8 | 5.1 ~ 7.2 |
| Camshaft position sensor [Bank 2] installation bolt | 0.7 ~ 1.0 | 6.9 ~ 9.8 | 5.1 ~ 7.2 |
| Crankshaft position sensor installation | 0.8 ~ 1.2 | 7.8~ 11.8 | 5.8 ~ 8.7 |
| Knock sensor #1,2 installation | 1.6 ~ 2.4 | 15.7~23.5 | 11.6~ 17.4 |
| ETC module installation bolt (on throttle body) | 0.7~ 1.1 | 6.9 ~ 10.8 | 5.1 ~ 8.0 |
| ETC module installation bolt (on ETC stay) | 1.6 ~ 2.6 | 15.7~25.5 | 11.6~ 18.8 |
| CVVT Oil temperature sensor installation | 2.0 ~ 4.0 | 19.6~39.2 | 14.5 ~ 28.9 |
| CVVT Oil control valve [Bank 1] installation bolt | 1.0 ~ 1.2 | 9.8~ 11.8 | 7.2 ~ 8.7 |
| CVVT Oil control valve [Bank 2] installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Vacuum valve (Variable intake actuator) installation bolts | 0.9 ~ 1.2 | 8.8 ~ 11.8 | 6.5 ~ 8.7 |
| Power steering pressure sensor installation bolt | 0.7~ 1.1 | 6.9 ~ 10.8 | 5.1 ~ 8.0 |
| Ignition coil condenser installation bolt | 0.7 ~ 1.1 | 6.9 ~ 10.8 | 5.1 ~ 8.0 |
| Ignition coil installation bolt | 0.4 ~ 0.6 | 3.9 ~ 5.9 | 2.9 ~ 4.3 |