Repair Procedures: Disassembly

Remove the alternator cover(A) using a screw driver(B).

Fig 1: Removing Alternator Cover Using Screw Driver
Courtesy of HYUNDAI MOTOR CO.
Remove the slip ring guide(A).
Loosen the mounting bolts(B) and disconnect the brush holder assembly(C).

Fig 2: Locating Slip Ring Guide, Mounting Bolts And Brush Holder Assembly
Courtesy of HYUNDAI MOTOR CO.
Remove the rectifier(A) with 4 screws.

Fig 3: Locating Rectifier And Screws
Courtesy of HYUNDAI MOTOR CO.
Remove the nut, pulley(A) and spacer.

Fig 4: Removing Nut, Pulley And Spacer
Courtesy of HYUNDAI MOTOR CO.
Loosen the 4 nuts(A).

Fig 5: Locating Nuts
Courtesy of HYUNDAI MOTOR CO.
Disconnect the rotor(A) and cover(B).

Fig 6: Locating Rotor And Cover
Courtesy of HYUNDAI MOTOR CO.
Reassembly is the reverse order of disassembly.