Repair Procedures: Removal
- Release the residual pressure in fuel line (Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE .
- Remove the fuel pump service cover (A).
Courtesy of HYUNDAI MOTOR CO.
- Disconnect the fuel pump connector (A), the fuel tank pressure sensor connector (B) and the connector (C).
- Disconnect the fuel feed tube quick connector (D) and the vapor tube quick-connector (E).
- Remove the installation bolts (F), and then remove the fuel pump from the fuel tank.
Courtesy of HYUNDAI MOTOR CO.
Courtesy of HYUNDAI MOTOR CO.