LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2011 >> Equus Signature >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System Components >> CVVT Oil Control Valve (OCV) >> Repair Procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Installation

  1. Installation is the reverse of removal.

    CVVT oil control valve installation bolt: 

    9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    CAUTION:
    • Pay attention to color of valve connector (Harness side) and the blue marking on the chain cover when installing.

      If an OCV is installed on opposite manifold, the engine may be damaged.

    • Connect the CVVT oil control valve connector as below.
    • Intake: OCV component marked blue color and the harness connector. (Gray)
    • Exhaust: OCV component marked nothing and the harness connector. (Black)
    CAUTION:
    • Install the component with the specified torques.
    • Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.
    CONNECTOR COLOR REFERENCE CHART

    Item Component
    Side    		 Harness
    Side    		 Chain
    Cover Mark
    Intake Black Gray Blue
    Exhaust Black Black Nothing
scientia non olet · About LEMON Manuals