Repair Procedures: Removal

[CVVT Oil Control Valve (Bank 1)] 

1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
2. Disconnect the CVVT oil control valve connector (A-Intake) and (B-Exhaust).
   Fig 1: Identifying CVVT Oil Control Valve Connector (A-Intake) And (B-Exhaust)

   Courtesy of HYUNDAI MOTOR CO.
3. Remove the cylinder head cover and the timing chain upper cover [Bank 1].

   (Refer to "CYLINDER HEAD ASSEMBLY " in EM group)

4. Remove the mounting bolt (A), and then remove the valve from the engine.
   Fig 2: Identifying CVVT Oil Control Valve Mounting Bolt

   Courtesy of HYUNDAI MOTOR CO.

[CVVT Oil Control Valve (Bank 2)] 

1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
2. Disconnect the CVVT oil control valve connector (A-Intake) and (B-Exhaust).
   Fig 3: Identifying CVVT Oil Control Valve Connector (A-Intake) And (B-Exhaust)

   Courtesy of HYUNDAI MOTOR CO.
3. Remove the cylinder head cover and the timing chain upper cover [Bank 2].

   (Refer to "CYLINDER HEAD ASSEMBLY " in EM group)

4. Remove the mounting bolt (A), and then remove the valve from the engine.
   Fig 4: Identifying CVVT Oil Control Valve Mounting Bolt

   Courtesy of HYUNDAI MOTOR CO.