LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2011 >> Equus Signature >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System Components >> ETC (Electronic Throttle control) System >> Repair Procedures >> Removal >> [ETC Module]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

[ETC Module]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air duct (A), the air cleaner upper cover (B) and the air intake hose (C).
    Fig 1: Identifying Air Duct, Air Cleaner Upper Cover And Air Intake Hose
    G07311501Courtesy of HYUNDAI MOTOR CO.
  3. Disconnect the ETC module connector (A).
  4. Disconnect the coolant hose (B).
  5. Remove the installation bolts, and then remove the ETC module (C) from the engine.
    Fig 2: Identifying ETC Module Connector, Coolant Hose And ETC Module
    G07311502Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals