Repair Procedures: Installation
CAUTION:
- Install the component with the specified torques.
- Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.
CAUTION:
- Apply the engine coolant to the O-ring.
CAUTION:
- Insert the sensor in the installation hole and be careful not to damage the sensor when installing.
- Installation is reverse of removal.
Engine coolant temperature sensor installation:
19.6 ~ 39.2 N.m (2.0 ~ 4.0 kgf.m, 14.5 ~ 28.9 lb-ft)