LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2011 >> Equus Signature >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System Components >> Intake Air Temperature Sensor (IATS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the intake air temperature sensor connector (A) and remove the installation bolt (B).
    Fig 1: Identifying Intake Air Temperature Sensor Connector And Installation Bolt
    G07311510Courtesy of HYUNDAI MOTOR CO.
  3. Remove the intake air hose (A) and the resonator (B).

    (Refer to "INTAKE MANIFOLD " in EM group.)

  4. Remove the installation clamp (C), and then remove the sensor from the air cleaner assembly.
    Fig 2: Identifying Intake Air Hose, Resonator And Installation Clamp
    G07311511Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals