On-vehicle Inspection: Notes

Spark Test 

1. Disconnect the ignition coil connectors (A).
   Fig 1: Identifying Ignition Coil Connectors

   Courtesy of HYUNDAI MOTOR AMERICA
2. Remove the ignition coils (A).
   Fig 2: Identifying Ignition Coils

   Courtesy of HYUNDAI MOTOR AMERICA
3. Using a spark plug socket, remove the spark plug.
4. Install the spark plug to the ignition coil.
5. Ground the spark plug to the engine.
   Fig 3: Testing For Spark Occurring During Cranking Engine

   Courtesy of HYUNDAI MOTOR AMERICA
6. Check if spark occurs while engine is being cranked.
   NOTE: To prevent fuel being injected from injectors while the engine is being cranked, disconnect the injector connector. Crank the engine for no more than 5 ~ 10 seconds.
7. Inspect all the spark plugs.
8. Using a spark plug socket, install the spark plug.
9. Install the ignition coil.
10. Reconnect the ignition coil connector.
    Fig 4: Ignition Coil Flow Chart

    Courtesy of HYUNDAI MOTOR AMERICA