Repair procedures: Adjustment

Adjusting method for T/M control cable 

1. Set room side lever and T/M side lever to "N" position.
2. Connect room side lever and shift cable.
3. Push cable to "F" direction, shown in the illustration, to eliminate FREE PLAY.
4. Tighten adjusting nut (A).

   Tightening torque: 

   7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

   Fig 1: Pushing Cable To F Direction

   Courtesy of HYUNDAI MOTOR CO.
5. After adjusting according Check to be sure that this part operates surely at each range of T/M side corresponding to each position of room lever.