LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2011 >> Tucson GL, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> General Information (Fuel System) >> Specifications >> Fuel Delivery System >> Sensors
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Delivery System: Sensors

Manifold Absolute Pressure Sensor (MAPS) 

□ Type: Piezo-resistive pressure sensor type

□ Specification

MANIFOLD ABSOLUTE PRESSURE SENSOR SPECIFICATIONS

Pressure [kPa (kgf/cm2 , psi)] Output Voltage (V)
20.0 (0.20, 2.9) 0.79
46.7 (0.47, 6.77) 1.84
101.3 (1.03, 14.7) 4.0

Intake Air Temperature Sensor (IATS) 

□ Type: Thermistor type

□ Specification

INTAKE AIR TEMPERATURE SENSOR SPECIFICATIONS

Temperature [°C(°F)] Resistance (kΩ)
-40 (-40) 40.93 ~ 48.35
-20 (-4) 13.89 ~ 16.03
0 (32) 5.38 ~ 6.09
10 (50) 3.48 ~ 3.90
20 (68) 2.31 ~ 2.57
40 (104) 1.08 ~ 1.21
50 (122) 0.76 ~ 0.85
60 (140) 0.54 ~ 0.62
80 (176) 0.29 ~ 0.34

Engine Coolant Temperature Sensor (ECTS) 

□ Type: Thermistor type

□ Specification

ENGINE COOLANT TEMPERATURE SENSOR SPECIFICATIONS

Temperature [°C(°F)] Resistance (kΩ)
-40 (-40) 48.14
-20 (-4) 14.13 ~ 16.83
0 (32) 5.79
20 (68) 2.31 ~ 2.59
40 (104) 1.15
60 (140) 0.59
80 (176) 0.32

Throttle Position Sensor (TPS) [integrated into ETC Module] 

□ Type: Variable resistor type

□ Specification

THROTTLE POSITION SENSOR SPECIFICATIONS

Throttle Angle(°) Output Voltage (V)
TPS1 TPS2
0 0 5.0
10 0.48 4.52
20 0.95 4.05
30 1.43 3.57
40 1.90 3.10
50 2.38 2.62
60 2.86 2.14
70 3.33 1.67
80 3.81 1.19
90 4.29 0.71
100 4.76 0.24
105 5.0 0
C.T (6~15°) 0.29 ~ 0.71 4.29 ~ 4.71
W.O.T (93~102°) 4.43 ~ 4.86 0.14 ~ 0.57
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS

Item Resistance (kΩ)
TPS1 0.875 ~ 1.625 [20°C (68°F)]
TPS2 0.875 ~ 1.625 [20°C (68°F)]

Crankshaft Position Sensor (CKPS) 

□ Type: Hall effect type

Camshaft Position Sensor (CMPS) 

□ Type: Hall effect type

Knock Sensor (KS) 

□ Type: Piezo-electricity type

□ Specification

CKPS, CMPS & KS SPECIFICATIONS

Item Specification
Capacitance (pF) 850 ~ 1, 150

Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 1] 

□ Type: Zirconia (ZrO2) [Linear] type

□ Specification

HEATED OXYGEN SENSOR SPECIFICATIONS (BANK 1/SENSOR 1)

Item Specification
Heater Resistance (Ω) 2.5 ~ 4.0 [20°C (69.8°F)]

Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2] 

□ Type: Zirconia (ZrO2) [Binary] type

□ Specification

HEATED OXYGEN SENSOR VOLTAGE OUTPUT (BANK 1/SENSOR 2)

A/F Ratio (λ) Output Voltage (V)
RICH Approx. 0.9
LEAN Approx. 0.04
HEATED OXYGEN SENSOR SPECIFICATIONS (BANK 1/SENSOR 2)

Item Specification
Heater Resistance (Ω) 3.3 ~ 4.1 [21°C (69.8°F)]

Accelerator Position Sensor (APS) 

□ Type: Variable resistor type

□ Specification

ACCELERATOR POSITION SENSOR SPECIFICATIONS

Accelerator Position Output Voltage (V)
APS1 APS2
C.T 0.7 ~ 0.8 0.29 ~ 0.46
W.O.T 3.85 ~ 4.35 1.93 ~ 2.18

Fuel Tank Pressure Sensor (FTPS) 

□ Type: Piezo - Resistivity type

□ Specification

FUEL TANK PRESSURE SENSOR SPECIFICATIONS

Pressure [kPa (kgf/cm2 , in H2O) Output Voltage (V)
-6.67 (-0.068, -26.8) 0.5
0 2.5
+6.67 (0.068, 26.8) 4.5