Repair procedures: Replacement

CAUTION:

When prying with a flat-tip screwdriver, wrap it with protective tape and apply protective tape around the related parts to prevent damage.
Put on gloves to protect your hands.

Using a screwdriver or remover, remove the front frame inner cover (A).

Fig 1: Locating Front Frame Inner Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the outside rear view mirror connector (A).
After loosening the mounting nuts, then remove the outside rear view mirror (B).
Tightening torque:

6.9~10.8 N.m (0.7~1.1 kgf.m, 5.1~8.0 lb-ft)

Fig 2: Identifying Outside Rear View Mirror And Connector
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE:
- Make sure the connector is connected properly.