Repair procedures: Removal
NOTE:
- Put on gloves to protect your hands.
- Use seat covers to avoid damaging any surfaces.
- Remove the following items.
- Front pillar trim
- Inside rear view mirror
- Wiper arm
- Engine room cover
(Refer to "COWL TOP COVER ")
- Cowl top cover
- Windshield glass heater connector.
(Refer to Windshield Deicer )
- Remove the windshield glass side molding.
- Cut out the windshield sealant using the sealant cutting tool (A) (09861-31100).
- Remove the windshield (B) carefully using the glass holder (A).