Repair procedures: Removal

Preparation
1. Remove the rear seat cushion (Refer to Rear Seat ).
2. Remove the service cover of the fuel pump (A).
  
  Fig 1: Identifying Fuel Pump Service Cover
  Courtesy of HYUNDAI MOTOR AMERICA
3. Disconnect the fuel pump connector (A).
  
  Fig 2: Identifying Fuel Pump Connector
  Courtesy of HYUNDAI MOTOR AMERICA
4. Idle the engine and wait until fuel in feed line is exhausted.
5. After engine stops, turn the ignition switch OFF.
Remove the service cover of the sub fuel sender (A).

Fig 3: Identifying Sub Fuel Sender Service Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the sub fuel sender connector (A).
Remove the sub fuel sender from the fuel tank after removing the installation bolts (B).

Fig 4: Identifying Sub Fuel Sender Connector And Installation Bolts
Courtesy of HYUNDAI MOTOR AMERICA

Fig 5: Identifying Sub Fuel Sender
Courtesy of HYUNDAI MOTOR AMERICA