Repair Procedures: Removal

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the shift cable (A).
Remove the manual control lever (D) after removing a nut (C).
Remove the inhibitor switch assembly (F) after removing the bolts (E).
Tightening torque:

[C] 16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)

[E] 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 1: Identifying Shift Cable, Manual Control Lever, Inhibitor Switch Assembly, Nut And Bolts
Courtesy of HYUNDAI MOTOR AMERICA