LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Equus Signature >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Shift Lever >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Pull the shift lever knob (A) upward to remove.
    Fig 1: Pulling Shift Lever Knob
    G08830441Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove the center console. (refer to CONSOLE .)
  3. Disconnect the sport mode connector (A).
    Fig 2: Identifying Sport Mode Connector
    G08830442Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the wire (A) for the airbag assembly.
    Fig 3: Identifying Airbag Assembly Wire
    G08830443Courtesy of HYUNDAI MOTOR AMERICA
  5. Take off the clip (A) and remove the shift cable assembly (B).
    Fig 4: Identifying Shift Cable Assembly And Clip
    G08830444Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the shift lever assembly (A) by removing the four bolts.
    Fig 5: Identifying Shift Lever Assembly
    G08830445Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the shift cable assembly from the transmission (refer to REPAIR PROCEDURES step 9 for illustration).
  8. Pull the rubber plug on the floor and pull out the shift cable assembly.