Fuel Injector Control Module: Service and Repair

Remove

1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
2. Remove the IDB cover (A).




3. Disconnect the IDB Connector (A).
4. Remove the mounting bolts (B), and then remove the IDB (C).






Installation

1. Installation is reverse of removal.

IDB installation bolt:
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)
IDB bracket installation bolt:
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)