LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Genesis 3.8 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Disconnect the accelerator control connector (B).
  4. Remove the accelerator pedal in the direction of "Removal direction" in the figure after removing the installation bolt (B).
    Fig 1: Disconnecting Accelerator Control Connector
    G08834190Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Identifying Accelerator Pedal And Sensor
    G08834191Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals