Repair Procedures: Installation
CAUTION:
- Install the component with the specified torques.
- Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
CAUTION:
- Apply the sealant (LOCTITE FED546 or equivalent) to the sensor.
CAUTION:
- Insert the sensor in the installation hole and be careful not to damage when installation.
- Installation is reverse of removal.
CVVT oil temperature sensor installation:
19.6 ~ 39.2 N.m (2.0 ~ 4.0 kgf.m, 14.5 ~ 28.9 lb-ft)