LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Genesis 3.8 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air intake hose (Refer to "INTAKE AND EXHAUST SYSTEM " in EM group).
  3. Disconnect the ETC module connector (A).
  4. Disconnect the coolant hoses (B).
    Fig 1: Identifying ETC Module Connector
    G08834134Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the installation bolts, and then remove the ETC module (C) from the engine.
    Fig 2: Identifying ETC Module And Coolant Hoses
    G08834135Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals