LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Genesis 4.6 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 4.6L >> CVVT Oil Control Valve (OCV) >> Repair Procedures >> Removal >> [CVVT Oil Control Valve (Bank 2)]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

[CVVT Oil Control Valve (Bank 2)]

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the CVVT oil control valve connector (A-Intake) and (B-Exhaust).
    Fig 1: Identifying CVVT Oil Control Valve Connector (A-Intake) And (B-Exhaust)
    G08819226Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the cylinder head cover and the timing chain upper cover [Bank 2].

    (Refer to "CYLINDER HEAD ASSEMBLY " in EM group)

  4. Remove the mounting bolt (A), and then remove the valve from the engine.
    Fig 2: Identifying Valve Mounting Bolt
    G08819227Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals