Ignition coil

Disconnect the LH/RH ignition coil connectors (A).

Fig 1: Identifying Ignition Coil Connectors (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Identifying Ignition Coil Connectors (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: When disconnecting the ignition coil connector, pull out the locking pin (A) and then pull out the connector while pressing the clip (B).

Fig 3: Disconnecting Ignition Coil Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the LH/RH ignition coils (A).
Tightening torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 4: Identifying Ignition Coils (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 5: Identifying Ignition Coils (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA
Installation is reverse order of removal.