Repair Procedures: Disassembly

Remove the alternator cover (A) using a screwdriver (B).

Fig 1: Removing Alternator Cover Using Screw Driver
Courtesy of HYUNDAI MOTOR CO.
Loosen the mounting bolts (A) and disconnect the brush holder assembly (B).

Fig 2: Identifying Brush Holder Assembly And Mounting Bolts
Courtesy of HYUNDAI MOTOR CO.
Remove the slip ring guide (A).

Fig 3: Identifying Slip Ring Guide
Courtesy of HYUNDAI MOTOR CO.
Use the SST (09373-27000) remove the pulley (A).

Fig 4: Removing Pulley Using SST
Courtesy of HYUNDAI MOTOR CO.
Loosen the 4 through bolts (A).

Fig 5: Identifying Through Bolts
Courtesy of HYUNDAI MOTOR CO.
Disconnect the rotor (A) and housing (B).

Fig 6: Identifying Rotor And Housing
Courtesy of HYUNDAI MOTOR CO.
Reassembly is the reverse order of disassembly.