LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Tucson GL, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Inspection >> Throttle Position Sensor (TPS)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Position Sensor (TPS)

  1. Connect the GDS on the Data Link Connector (DLC).
  2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T.
    TPS OUTPUT VOLTAGE SPECIFICATIONS

    Throttle Angle Output Voltage (V)
    TPS 1 TPS 2
    C.T 0.3 ~ 0.9 4.2 ~ 5.0
    W.O.T 1.5 ~ 3.0 3.3 ~ 3.8
  3. Turn the ignition switch OFF and disconnect the scantool from the DLC.
  4. Disconnect the ETC module connector and measure the resistance between the ETC module terminals 1 and 2.

    Specification:  Refer to SPECIFICATION .

scientia non olet · About LEMON Manuals